TM-9-2330-227-14-P
SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
JUNE 1985
TM-9-2330-227-14-P - Page 188 of 576
TM 9-2330-227-14&P
HYDRAULIC TUBES AND FITTINGS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
11.
Axle(1) and
left tube (2)
12.
Axle(1) and
two clamps (3)
13.
Nut (4)
14.
Left top wheel
cylinder (6)
15.
Fitting (7) and
connection (9)
16.
Connection (9)
17.
Fitting (7)
18.
Left bottom wheel
cylinder (11)
19.
Bolt (12) and
connection (14)
20.
Connection (14)
21.
Bolt (12)
22.
Backing plate (16)
23.
Two nuts (18)
4-110
Two clamps (3)
Using ball-peen hammer and 1/2-inch
hand cold chisel, bend back.
Left tube (2)
Take off.
Connection (5)
Using 7/16-inch open-end box
and 9/16-inch open-end wrenches,
unscrew and take off.
NOT E
If working on one-wheel cylinder option, go to step 34.
Fitting (7) with
gasket (8)
Gasket (8)
Fitting (7) with
gasket (10)
Gasket (10)
Bolt (12) with
gasket (13)
Gasket (13)
Bolt (12) with
gasket (15)
Gasket (15)
Tube (17) with
nuts (18)
Two connections (9)
and (14)
Using 3/4-inch box-end wrench, unscrew
and take off.
Take off.
Take off.
Take off.
Using 11/16-inch box-end wrench,
unscrew and take off.
Take off.
Take off.
Take off.
Take off.
a. Using 7/16-inch open-end box
and 9/16-inch open-end wrenches,
unscrew and take off.
b. Repeat steps 7 thru 23a for right side.
Back to Top
