TM-9-2330-227-14-P

SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JUNE 1985

TM-9-2330-227-14-P - Page 195 of 576

TM 9-2330-227-14&P

AIR LINES AND FITTINGS

This task covers:

a: Removal (page 4-118)

b. Installation (page 4-120)

INITIAL SETUP

Tools

Materials/Parts

Bar, pry

Tape, teflon (item 20, appendix E)

Hammer, hand, ball-peen, 2-lb

Pliers, long round-nose

Personnel Required

Screwdriver, cross-tip, number two

Screwdriver, flat-tip, 3/16-inch

Two

Wrench, box-end, 1/2-inch

Wrench, box-end, 9/16-inch

Equipment Condition

Wrench, box-end, 11/4-inch

Wrench, box-end, 11/2-inch

Air reservoir drained (page 2-13).

Wrench, open-end, 9/16-inch

Wrench, open-end, 11/16-inch

Wrench, open-end, 7/8-inch

Wrench, open-end, 1-inch

Wrench, open-end, 11/16-inch

Wrench, open-end box, 5/8-inch

Wrench, pipe, 18-inch

ACTION

LOCATION

ITEM

REMARKS

NOT E

New air tubing is manufactured to required length from bulk items. For information on

manufacturing new tubing, go to appendix G.

Both lines are removed the same way. This task is for one; repeat for the other.

4-117