TM-9-2330-227-14-P

SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JUNE 1985

TM-9-2330-227-14-P - Page 216 of 576

TM 9-2330-227-14&P

AIR FILTERS - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

AIR FILTER BYPASS

NOT E

Air filters may be eliminated using this bypass procedure.

18.

Filter

Remove (page 4-135).

19.

Two adapters (1)

Two nuts (3)

Screw into adapters (1), and tighten

and two air

using 5/8-inch open-end box and 9/16-

lines (2)

inch open-end wrenches.

20.

Two adapters (1)

Coupling (4)

a. Wrap threads clockwise two

turns with teflon tape.

b. Screw adapters (1) into coupling (4)

one turn, alternating adapters (1) on

either side of coupling (4), and

tighten using 12-inch adjustable

wrench and 9/16-inch open-end

21.

Frame member (5)

Filter (6)

Put in place.

22.

Filter (6) and

U-bolt (7)

Put in place.

frame member (5)

23.

U-bolt (7) and

Two Iockwashers (8)

Screw in, and tighten using 7/16-inch

frame member (5)

and nuts (9)

box-end wrench.

24.

Filter (6)

Two adapters (10)

a.

b.

4-138

Wrap threads clockwise two

turns with teflon tape.

Screw in, and tighten using 9/16-inch

box-end wrench.

TA231299