TM-9-2330-238-14

CHASSIS, SEMITRAILER: 6-TON, 4-WHEEL M295A1; SEMITRAILER, VAN: EXPANSIBLE, 6-TON, 4-WHEEL M313; SEMITRAILER, VAN: SHOP, FOLDING SIDES, 6-TON, 4-WHEEL M447 AND M447C; SEMITRAILER, VAN: REPAIR PARTS, SHOP EQUIPMENT, 6-TON, 4-WHEEL M749; SEMITRAILER, VAN: REPAIR PARTS STORAGE, 6-TON, 4-WHEEL M750

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL

JULY 1992

TM-9-2330-238-14 - Page 127 of 462

TM 9-2330-238-14

4-21. HINGED FLOOR CONDUCTOR PLATE REPLACEMENT (M313).

This Task Covers:

a.

Removal

b.

Installation

Initial Setup:

Equipment Conditions:

●

External power supply

Tools/Test Equipment:

Materials/Parts:

●

Marker tags (Item 15, Appendix E)

●

General mechanic’s tool kit

1.

Remove two screws (7) and tag and disconnect

two electrical wires (6) from contact assembly (4).

2.

Remove four screws (5), contact assembly (4),

and gasket (3) from conductor plate (l).

3.

Remove four screws (2) and conductor plate (1).

1.

Position conductor plate (1) and install four screws (2).

b. INSTALLATION

2.

Position contact assembly (4) and gasket (3) on conductor plate (1) and

3.

Connect electrical wires (6) to contact assembly (4) with two screws (7).

FOLLOW-ON TASKS:

•

Connect external power supply cable.

install four screws (5).

Remove tags.

TA701944

4-29