TM-9-2330-238-14

CHASSIS, SEMITRAILER: 6-TON, 4-WHEEL M295A1; SEMITRAILER, VAN: EXPANSIBLE, 6-TON, 4-WHEEL M313; SEMITRAILER, VAN: SHOP, FOLDING SIDES, 6-TON, 4-WHEEL M447 AND M447C; SEMITRAILER, VAN: REPAIR PARTS, SHOP EQUIPMENT, 6-TON, 4-WHEEL M749; SEMITRAILER, VAN: REPAIR PARTS STORAGE, 6-TON, 4-WHEEL M750

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL

JULY 1992

TM-9-2330-238-14 - Page 120 of 462

TM 9-2330-238-14

4-16. INTERVEHICULAR CABLE RECEPTACLE REPLACEMENT.

This Task Covers:

a.

Removal

b.

Installation

Initial Setup:

Equipment Conditions:

Materiais/Parts:

●

Towing vehicle intervehicular cable disconnected

from semitrailer (para 2-11).

●

Solder (Item 13, Appendix E)

●

Marker tags (Item 15, Appendix E)

Tools/Test Equipment:

●

Electrical tape (Item 17, Appendix E)

●

General mechanic’s tool kit

●

Four Iockwashers

. Soldering gun

a.

REMOVAL

1.

Remove four screws (5), nuts (1), and lockwash-

ers (2) from cover (4) and chassis frame (7).

Discard Iockwashers. Tag ground wire.

2.

Remove cover (4) from receptacle (3).

3.

Disassemble receptacle connector (3). Tag and

unsolder wires (6).

b.

INSTALLATION

1.

Solder wires (6) to receptacle connector (3) and remove tags.

2.

Wrap exposed wires with electrical tape.

3.

Position cover (4) and receptacle connector (3) in recess and install three screws (5), new Iockwashers (2), and

nuts (l).

4.

Install ground wire and remaining screw (5), new Iockwasher (2), and nut (1). Discard tags.

FOLLOW-ON TASKS:

●

Connect towing vehicle intervehicular cable to semitrailer (para 2-10).

TA701937

4-22