TM-9-2330-238-14

CHASSIS, SEMITRAILER: 6-TON, 4-WHEEL M295A1; SEMITRAILER, VAN: EXPANSIBLE, 6-TON, 4-WHEEL M313; SEMITRAILER, VAN: SHOP, FOLDING SIDES, 6-TON, 4-WHEEL M447 AND M447C; SEMITRAILER, VAN: REPAIR PARTS, SHOP EQUIPMENT, 6-TON, 4-WHEEL M749; SEMITRAILER, VAN: REPAIR PARTS STORAGE, 6-TON, 4-WHEEL M750

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL

JULY 1992

TM-9-2330-238-14 - Page 155 of 462

TM 9-2330-238-14

4-34. CHASSIS OR VAN BODY WIRING HARNESS REPAIR.

This Task Covers:

a.

Connectors and Receptacles Repair

b.

Harness Repair

Initial Setup:

Equipment Conditions:

●

Towing vehicle intervehicular cable disconnected

from semitrailer (para 2-11).

Tools/Test Equipment:

●

General mechanic’s tool kit

●

Soldering gun

Materials/Parts:

●

Solder (Item 13, Appendix E)

●

Marker tags (Item 15, Appendix E)

●

Electrical tape (Item 17, Appendix E)

I

a.

CONNECTORS AND RECEPTACLES REPAIR

1.

Unscrew cable retaining nut (2) from receptacle

(4) and slide back over cable (l).

2.

Remove grommet (3) from receptacle and remove

damaged insert (5) from grommet.

3.

Remove damaged insert (5) from wire lead (6).

4.

Strip insulation from wire lead (6) equal to the

depth of insert solder well.

5.

Install wire lead (6) into insert (5) and solder well.

6.

Install insert (5) into grommet (3) until seated.

7.

Install grommet (3) and retaining nut (2) on receptacle (4).

4-57