TM-9-2330-238-14

CHASSIS, SEMITRAILER: 6-TON, 4-WHEEL M295A1; SEMITRAILER, VAN: EXPANSIBLE, 6-TON, 4-WHEEL M313; SEMITRAILER, VAN: SHOP, FOLDING SIDES, 6-TON, 4-WHEEL M447 AND M447C; SEMITRAILER, VAN: REPAIR PARTS, SHOP EQUIPMENT, 6-TON, 4-WHEEL M749; SEMITRAILER, VAN: REPAIR PARTS STORAGE, 6-TON, 4-WHEEL M750

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL

JULY 1992

TM-9-2330-238-14 - Page 149 of 462

TM 9-2330-238-14

4-32. MARKER CLEARANCE LIGHT MAINTENANCE.

This Task Covers:

a.

Lamp Replacement

c.

Cleaning and Inspection

b.

Removal

d.

Installation

Initial Setup:

Equipment Conditions:

Materials/Parts:

●

Towing vehicle intervehicular cable disconnected

from semitrailer (para 2-11).

●

Dry cleaning solvent (Item 14, Appendix E)

Tools/Test Equipment:

●

General mechanic’s tool kit

a.

LAMP REPLACEMENT

1.

Remove two screws (l), retainer (2), and lens (3) from plate (7).

2.

Push in on lamp (5), turn counterclockwise, and remove from socket (6).

3.

Install lamp (5) in socket (6) and turn clockwise.

NOTE

The word BOTTOM is printed on the blackout marker clearance light lens. Ensure lens

is positioned properly when installed.

4.

Position lens (3) and retainer (2) in place on plate (7) and install two screws (l).

TA701957

4-51