TM-9-2330-238-14

CHASSIS, SEMITRAILER: 6-TON, 4-WHEEL M295A1; SEMITRAILER, VAN: EXPANSIBLE, 6-TON, 4-WHEEL M313; SEMITRAILER, VAN: SHOP, FOLDING SIDES, 6-TON, 4-WHEEL M447 AND M447C; SEMITRAILER, VAN: REPAIR PARTS, SHOP EQUIPMENT, 6-TON, 4-WHEEL M749; SEMITRAILER, VAN: REPAIR PARTS STORAGE, 6-TON, 4-WHEEL M750

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL

JULY 1992

TM-9-2330-238-14 - Page 140 of 462

TM 9-2330-238-14

4-28. BLACKOUT STOPLIGHT MAINTENANCE (EARLY MODEL).

This Task Covers:

a.

Lamp Replacement

d.

Cleaning and Inspection

b.

Removal

e. Assembly

c.

Disassembly

f .

Installation

Initial Setup:

Equipment Conditions:

Materials/Parts:

●

Towing vehicle intervehicular cable disconnected

from semitrailer (para 2-11).

Ž Adhesive (Item 1, Appendix E)

●

Dishwashing compound (Item 6, Appendix E)

Tools/Test Equipment:

●

Dry cleaning solvent (Item 14, Appendix E)

●

General mechanic’s tool kit

Ž One Iockwasher

a.

LAMP REPLACEMENT

1.

Remove two screws (8), door assembly (7), and gasket (6) from housing (2).

2.

Push in on lamp (5), turn counterclockwise, and remove from socket (4).

3.

Install lamp (5) in socket (4), push in, and turn clockwise.

4.

Position door assembly (7) and gasket (6) in place on housing (2) and install two screws (8).

b.

REMOVAL

1.

2.

Disconnect connector (1) from housing (2).

Remove bolt (17), Iockwasher (16), and housing (2) from rear crossmember of chassis frame. Discard

Iockwasher.

TA701951

4-42