TM-9-2330-238-14

CHASSIS, SEMITRAILER: 6-TON, 4-WHEEL M295A1; SEMITRAILER, VAN: EXPANSIBLE, 6-TON, 4-WHEEL M313; SEMITRAILER, VAN: SHOP, FOLDING SIDES, 6-TON, 4-WHEEL M447 AND M447C; SEMITRAILER, VAN: REPAIR PARTS, SHOP EQUIPMENT, 6-TON, 4-WHEEL M749; SEMITRAILER, VAN: REPAIR PARTS STORAGE, 6-TON, 4-WHEEL M750

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL

JULY 1992

TM-9-2330-238-14 - Page 181 of 462

6.

TM 9-2330-238-14

4-40.

BRAKE BACKING PLATE AND SUPPORT AND ADJUSTER MAINTENANCE (Con’t).

7.

8.

NOTE

Ensure that anchor pins are in place in support and adjuster assembly before it is

installed on brake backing plate.

Position each support and adjuster assembly (1) in place on backing plate (3) so starwheels 16) mesh with

adjusting gears (13) and scribe marks aline.

Install two capscrews (5) and new Iockwasher (4) to secure each supportand adjuster assembly 1) to backing

plate (3).

Install two capscrews (20) from rear of axle flange

(8), through two center mounting holes, and

secure with two nuts (18 and 22) and new

Iockwasher (19 and 21).

FOLLOW-ON TASKS:

●

Install wheel cylinder (para 4-39).

TA701985

4-83