TM-9-2330-238-14

CHASSIS, SEMITRAILER: 6-TON, 4-WHEEL M295A1; SEMITRAILER, VAN: EXPANSIBLE, 6-TON, 4-WHEEL M313; SEMITRAILER, VAN: SHOP, FOLDING SIDES, 6-TON, 4-WHEEL M447 AND M447C; SEMITRAILER, VAN: REPAIR PARTS, SHOP EQUIPMENT, 6-TON, 4-WHEEL M749; SEMITRAILER, VAN: REPAIR PARTS STORAGE, 6-TON, 4-WHEEL M750

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL

JULY 1992

TM-9-2330-238-14 - Page 187 of 462

TM 9-2330-238-14

4-43.

AIR FILTER MAINTENANCE (EARLY MODEL) (Con’t).

c.

CLEANING AND INSPECTION

WARNING

Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear protective goggles

and gloves, and use only in a well-ventilated area. Avoid contact with skin, eyes, and

clothes, and DO NOT breathe vapors. DO NOT use near open flame or excessive heat.

The solvent’s flash point is 100°F-138°F (38°C-59°C). If you become dizzy while

using cleaning solvent, Immediately get fresh air and medical help. If solvent contacts

eyes, immediately wash your eyes and get medical aid.

1.

Clean all metal parts, including air filter body and filter element with dry cleaning solvent.

2.

Inspect parts for cracks, bends, breaks, or dents. Replace all defective parts.

d. ASSEMBLY

Position new gasket (12), spring (11), spring

tension washer (10), and filter element (9) in place

on adapter bushing (13). Apply antiseizing tape to

adapter bushing threads and install adapter

bushing and pipe plug (14) in air filter body (3).

e.

INSTALLATION

1.

Install air filter body (3) with U-bolt (6), two washers (7), and nuts (8).

2.

Apply antiseizing tape to air filter fitting threads and install two air filter fittings (2 and 4) in air filter body (3).

Connect two air tubes (1 and 5) to air filter fittings,

3.

Close draincock on air reservoir,

TA701989

4-89