TM-9-2330-267-14-P

TRAILER, TANK, WATER: 400 GALLON, 1-1/2 TON, 2 WHEEL M149, M149A1 AND M149A2

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS)

JULY 1991

TM-9-2330-267-14-P - Page 136 of 354

TM 9-2330-267-14&P

4-47. FENDER ASSEMBLY REPLACEMENT.

This Task Covers:

a.

Removal

b.

Installation

Initial Setup:

Materials/Parts:

Tools/Test Equipment:

l Sixteen Iockwashers

l General mechanic’s tool kit

NOTE

Right and left fenders and fender supports are replaced the same way. This procedure

covers one side.

a.

REMOVAL

NOTE

The M149 has no splashguard. If working on an M149, skip step 1.

1.

Remove four nuts (12), Iockwashers (11), screws (4), retainer (13), and splashguard (7) from fender support (2).

Discard Iockwashers.

2.

Remove six screws (8), flatwashers (9), Iockwashers (5), nuts (6), and fender (10) from fender supports

(2 and 16). Discard Iockwashers.

NOTE

The M149 has Iockwashers located between screws (3) and fender supports

(2 and 16).

3.

Remove six screws (3), Iockwashers (14), nuts (15), and fender supports (2 and 16) from frame assembly (1).

4-86