TM-9-2330-267-14-P

TRAILER, TANK, WATER: 400 GALLON, 1-1/2 TON, 2 WHEEL M149, M149A1 AND M149A2

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS)

JULY 1991

TM-9-2330-267-14-P - Page 144 of 354

TM 9-2330-267-14&P

4-50. SUSPENSION BRACKET REPLACEMENT.

This Task Covers:

a.

Removal

b. Installation

Initial Setup:

Equipment Conditions:

l Spring removed (para 4-51).

l Radius rod removed (para 4-53).

TooIs/Test Equipment:

l General mechanic’s tool kit

Materials/Parts:

l Seven Iockwashers

NOTE

There are four suspension brackets. All four are replaced the same way. This procedure

describes replacement of one suspension bracket.

a. REMOVA L

Remove seven screws (1), Iockwashers (2), nuts

(3), and suspension bracket (4) from frame

assembly (5). Discard Iockwashers.

b .

INSTALLATION

Position suspension bracket (4) on frame assembly (5) and install seven screws (1), new Iockwashers (2), and

nuts (3).

FOLLOW-ON TASKS:

l Install spring (para 4-51).

l Install radius rod (para 4-53).

4-94