TM-9-2330-267-14-P

TRAILER, TANK, WATER: 400 GALLON, 1-1/2 TON, 2 WHEEL M149, M149A1 AND M149A2

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS)

JULY 1991

TM-9-2330-267-14-P - Page 146 of 354

TM 9-2330-267-14&P

4-51. SPRING ASSEMBLY REPLACEMENT (Con’t).

NOTE

Two people are required to remove spring as-

sembly from brackets.

2.

Remove two bolts (6) and nuts (5) from two

brackets (1) and spring assembly (4) at each end

of spring assembly.

3.

Remove spring assembly (4) from two brackets

(1).

4.

Loosen two set screws (7) and tap pin (8) free of

bracket (1).

5.

Remove two bushings (11) and roller assembly

(10) from bracket (1).

6.

Remove grease fitting (9) from pin (8).

7.

Repeat steps 4 through 6 for remaining bracket

(1).

b. INSTALLATION

1.

Install grease fitting (9) in pin (8).

2.

Position two bushings (11) and roller assembly (10) in bracket (1).

3.

Tap pin (8) into position and tighten two set screws (7).

NOTE

Two people are required to install spring assembly.

4.

Repeat steps 1 through 3 for remaining bracket (1).

5.

Position and support spring assembly (4) in two brackets (1).

6.

Install two bolts (6) and nuts (5) in two brackets (1).

TA507057

4-96