TM-9-2330-267-14-P

TRAILER, TANK, WATER: 400 GALLON, 1-1/2 TON, 2 WHEEL M149, M149A1 AND M149A2

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS)

JULY 1991

TM-9-2330-267-14-P - Page 149 of 354

TM 9-2330-267-14&P

4-53. RADIUS ROD MAINTENANCE.

This Task Covers:

a. Removal

d. Installation

b.

Disassembly

e.

Adjustment

c.

Assembly

lnitial Setup:

Equipment Conditions:

Materials/Parts:

l Spring assembly removed (para 4-51).

Q Two locknuts

Tools/Test Equipment:

l Three Iockwashers

l General mechanic’s tool kit

NOTE

There are two radius rods. This procedure covers replacement for one radius rod.

a. REMOVA L

1.

2.

3.

Remove locknut (7), nut (6), and capscrew (1) from radius rod (4). Discard locknut.

Remove two shouldered washers (2), bushings (9), sleeve bearing (3), and two flatwashers (8) from bracket (5).

Inspect bushings for damage, replace if required.

Remove radius rod (4) from bracket (5)

TA507060

4-99