TM-9-2330-324-14-P

TRAILER, CARGO: 1-1/2-TON, 2-WHEEL, M105A3

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JULY 2002

TM-9-2330-324-14-P - Page 125 of 350

TM 9-2330-324-14&P

0024 00-3

GENERAL MAINTENANCE INSTRUCTIONS—Continued

0024 00

Castings, Forgings, and Machined Metal Parts

WARNING

Solvents can burn easily, can give off harmful vapors, and are harmful to

skin and clothing. To avoid injury or death, keep away from open fire and

use in a well-ventilated area. If solvent gets on skin or clothing, wash

immediately with soap and water.

Clean inner and outer surfaces with cleaning solvent.

Remove grease and accumulated deposits with a stiff bristle brush.

WARNING

Compressed air used for cleaning or drying purposes, or for clearing

restrictions, should never exceed 30 psi (207 kPa). Wear protective

clothing (goggles/shield, gloves, etc.) and use caution to avoid injury to

personnel.

Clear all threaded holes with compressed air to remove dirt and cleaning fluids.

Oil Seals, Electrical Cables, and Flexible Hoses

CAUTION

Do not wash oil seals, electrical harnesses, and flexible hoses with dry-

cleaning solvent or mineral spirits. Serious damage or destruction of

material would result.

Wash electrical cables and flexible hoses with a solution of soap and water and wipe dry.

Bearings

Clean bearings in accordance with TM 9-214.

INSPECTION INSTRUCTIONS

NOTE

All damaged areas should be marked for repair or replacement.

All components and parts must be carefully checked to determine if they are serviceable for use, can be

repaired, or must be scrapped.