TM-9-2330-324-14-P

TRAILER, CARGO: 1-1/2-TON, 2-WHEEL, M105A3

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JULY 2002

TM-9-2330-324-14-P - Page 127 of 350

TM 9-2330-324-14&P

0024 00-5/(6 blank)

GENERAL MAINTENANCE INSTRUCTIONS—Continued

0024 00

REPAIR INSTRUCTIONS—Continued

After repair, clean all parts thoroughly to prevent dirt, metal chips, or other foreign material from entering

any working parts.

TAGGING WIRES AND HOSES

As soon as the first wire, hose, or tube is disconnected, write number “1” on two tags. Secure one tag to

the wire, hose, or tube and the other tag to the terminal, nipple, or fitting. After disconnecting the second

wire, hose, or tube, write number “2” on two tags. Secure one tag to the wire, hose, or tube, and the

second tag to the terminal, nipple, or fitting. Do the same for all wires, hoses, and tubes.

Note which numbers you used, in pencil, on art in this manual. This will help you to accurately re-tag, if tags

are removed to perform cleaning and maintenance work.

Remove all tags when finished.

END OF TASK