TM-9-2330-324-14-P
TRAILER, CARGO: 1-1/2-TON, 2-WHEEL, M105A3
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
JULY 2002
TM-9-2330-324-14-P - Page 82 of 350
TM 9-2330-324-14&P
0016 00-2
BRAKE SYSTEM ORGANIZATIONAL TROUBLESHOOTING—Continued
0016 00
Table 1. Troubleshooting Procedures—Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2.
BRAKES
GRAB—Continued
2.
Check for grease or dirt on
brakeshoe linings.
1.
If grease or dirt is present,
replace affected
brakeshoe(s).
3.
Check for worn or loose
brakeshoe linings.
Brakeshoe linings should
have a minimum thickness
of 0.125 in. (3.2 mm).
1.
Replace brakeshoes if
linings are worn or loose
(WP 0033 00).
3.
BRAKES DO NOT
RELEASE
1.
Check handbrake rod,
turnbuckles, shaft
assembly, and cable
assemblies for damage and
proper adjustment.
1.
Replace handbrake rod,
turnbuckles, shaft
assembly, or cable
assemblies, or adjust
handbrake, as required
(WP 0032 00).
2.
In cold weather, check for
frozen brakeshoe linings.
1.
Remove wheel (WP 0020
00). Heat brakedrum to
thaw.
3.
Check for proper brake
adjustment.
1.
If brakes are out of
adjustment, adjust brakes
(WP 0033 00).
END OF TASK
Back to Top
