TM-9-2330-328-14-P

CHASSIS, CONTAINERIZED KITCHEN TRAILER: 7 1/2-TON, 4-WHEEL XCK2000 AND XCK2000E1

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

DECEMBER 2001

TM-9-2330-328-14-P - Page 126 of 254

TM9-2330-328-14&P

MAINTENANCE OF AIR BRAKE SYSTEM - Continued

0016 00

BRAKE AIR CHAMBER - Continued

(5) Mount air chamber

(3)

with two hex nuts

(6)

and lock washers

(7)

.

NOTE

It may be necessary to turn slack adjuster adjustment screw to adjust chamber push rod.

(6) Align rod end

(10)

with bottom hole in slack adjuster

(13)

. Install headed pins

(5)

and cotter pins

(4)

.

(7) Uncage brake air chamber spring (WP 0006 00-3).

(8) Connect air hoses

(1 and 2)

.

(9) Adjust brakes (WP 0016 00-10).

AIR LINES

Materials/Tools

Anti-seize tape (WP 0026 00)

General mechanics tool kit

a. Removal of Air Hoses and Fittings.

NOTE

Tag all hoses before disconnecting from vehicle.

(1) Remove intervehicular air hoses and gladhands

(1)

from drawbar. Remove

packing from gladhands.

(2) Remove hoses

(2)

from air chambers

(3)

, trailer valve

(4)

and relay valves

(5)

.

(3) Remove drain cocks from air tanks

(6)

.

b. Installation of Air Hoses and Fittings. (Ref.

WP 0016 00-16)

(1) Install drain cocks in air tanks

(6)

.

(2) Connect hoses

(2)

to air chambers, trailer valve

(4)

and relay valves

(5)

.

0016 00-14