TM-9-2330-330-14-P
SEMITRAILER, FUEL TANKER: 5000-GALLON, FUEL-DISPENSING, AUTOMOTIVE, M969A3
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
NOVEMBER 2005
TM-9-2330-330-14-P - Page 219 of 1116
TM 9-2330-330-14&P
0043 00-1
ORGANIZATIONAL PREVENTIVE MAINTENANCE
CHECKS AND SERVICES (PMCS)
0043 00
THIS WP COVERS:
PMCS Procedures
INITIAL SETUP:
Maintenance Level
Tools and Special Tools
Organizational
Tool kit, general mechanic’s (item 4, WP 0171 00)
Suitable container (item 1, WP 0171 00)
Material/Parts
Compound, cleaning (item 4, WP 0174 00)
References
DA Form 2404
WP 0067 00
DA Form 5988-E
WP 0068 00
DA PAM 738-750
WP 0069 00
DD Form 314
WP 0082 00
WP 0007 00
WP 0084 00
WP 0041 00
WP 0104 00
WP 0044 00
WP 0110 00
WP 0050 00
WP 0133 00
WP 0065 00
WP 0173 00
GENERAL
To ensure that the semitrailer is ready for operation at all times, it must be inspected on a regular basis
so that defects may be found before they result in serious damage, equipment failure, or injury to
personnel. This WP contains instructions on inspections, adjustments, and corrections to be performed
by organizational maintenance.
SERVICE INTERVALS
Perform the PMCS procedures listed in Table 1 at the following intervals:
Perform “Monthly” procedures once each month.
Perform “Semiannual” PMCS procedures twice each year.
Perform “Annual” procedures once each year.
Perform “Biannual” procedure every other year.
Perform “Every 100 Hours” procedures every 100 hours.
Perform “Every 200 Hours” procedures every 200 hours.
Perform “Every 600 Hours” procedures every 600 hours.
PMCS items and intervals are to be scheduled on DD Form 314 in accordance with DA PAM 738–750.
After operation in water, mud, or loose sand, clean the semitrailer as soon as possible. Lubricate without
waiting for the next scheduled service.
Lubrication instructions are provided in WP 0044 00.
Back to Top
