TM-9-2330-330-14-P

SEMITRAILER, FUEL TANKER: 5000-GALLON, FUEL-DISPENSING, AUTOMOTIVE, M969A3

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

NOVEMBER 2005

TM-9-2330-330-14-P - Page 223 of 1116

TM 9-2330-330-14&P

0043 00-5

ORGANIZATIONAL PREVENTIVE MAINTENANCE

CHECKS AND SERVICES (PMCS)—Continued

0043 00

Table 1. Organizational PMCS—Continued.

ITEM NO.

INTERVAL

ITEM TO BE

INSPECTED

PROCEDURE

NOT FULLY

MISSION

CAPABLE IF:

5

6

Semiannual

Semiannual

Landing Gear

Bogie Assembly

Check condition and operation of

landing gear. Inspect for damage

or wear. Replace damaged parts

(refer to WP 0084 00).

a.

Position semitrailer on hard

level surface with front

resting on landing gear.

Jack and block frame.

Remove wheel assemblies

(refer to WP 0007 00).

NOTE

Clean axle and suspension

system with water and fiber

brush to allow for careful

inspection.

b.

Inspect general condition of

trunnion tube, axles, and

leaf springs. Look for cracks

or damage. If cracked or

damaged, notify Direct

Support maintenance.

Any cracks or

damage are

evident.

c.

Check tightness of U-bolts

and clips on leaf springs.

Tighten loose U-bolts and

clips. If damage or wear is

evident, notify Direct

Support maintenance.

d.

Check tightness of U-bolts

and screws on leaf spring

cap and seat. Tighten loose

U-bolts and screws. If

damage or wear is evident,

notify Direct Support

maintenance.

Any damage or

wear is evident.

Any damage or

wear is evident.