TM-9-2330-330-14-P

SEMITRAILER, FUEL TANKER: 5000-GALLON, FUEL-DISPENSING, AUTOMOTIVE, M969A3

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

NOVEMBER 2005

TM-9-2330-330-14-P - Page 454 of 1116

TM 9-2330-330-14&P

0100 00-2

REFLECTORS REPLACEMENT—Continued

0100 00

INSTALLATION

WARNING

Solvents can burn easily, can give off harmful vapors,

and are harmful to skin and clothing. To avoid injury or

death, keep away from open fire and use in a well-ventilated

area. If solvent gets on skin and clothing, wash immediately

with soap and water.

1.

Remove any residual dirt or grit from area where reflector is to be installed using cleaning

compound. Surface must be clean and dry before installing reflector.

2.

Remove protective backing from new reflector (1) and position on semitrailer.

3.

Use a clean dry rag, press down reflector (1), and smooth away any air bubbles.

FOLLOW-ON TASK

Disconnect semitrailer grounding cables (WP 0007 00).

END OF TASK