TM-9-2330-330-14-P

SEMITRAILER, FUEL TANKER: 5000-GALLON, FUEL-DISPENSING, AUTOMOTIVE, M969A3

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

NOVEMBER 2005

  TM-9-2330-330-14-P - Page 507 of 1116

TM 9-2330-330-14&P
0116 00-3
ALTERNATOR AND MOUNTING BRACKET MAINTENANCE—Continued
0116 00
INSTALLATION
1.
Install mounting bracket (12), bottom bracket of alternator guard (16), two bolts (11), six washers
(10), and two new self-locking nuts (9) to alternator (4). Do not tighten.
2.
Install alternator (4), mounting bracket (12), three new lockwashers (18), washers (19), and bolts
(17) to intermediate housing (20).
3.
Install top bracket of alternator guard (16), alternator (4), new self-locking nut (6), two washers (7),
and bolt (5) to adjuster arm (8). Do not tighten.
4.
Push alternator (4) toward engine (13) far enough to allow belt (15) to be installed on pulley (14).
5.
Pull alternator (4) from engine (13) to apply tension to belt (15), and hand tighten nut (6) to adjuster
arm (8) so alternator remains in place.


Back to Top