TM-9-2330-330-14-P
SEMITRAILER, FUEL TANKER: 5000-GALLON, FUEL-DISPENSING, AUTOMOTIVE, M969A3
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
NOVEMBER 2005
TM-9-2330-330-14-P - Page 709 of 1116
TM 9-2330-330-14&P
0159 00-1
ENGINE HEAT SHIELD REPLACEMENT
0159 00
THIS WP COVERS:
Removal, Installation, Follow-On Tasks
INITIAL SETUP:
Maintenance Level
Tools and Special Tools
Direct and General Support
Tool kit, general mechanic’s (item 4, WP 0171 00)
Materials/Parts Personnel
Required
Self-locking nuts (8) (item 88, WP 0175 00)
Two
Self-locking nuts (2) (item 89, WP 0175 00)
Equipment Conditions
Semitrailer disconnected from prime mover (refer
to WP 0007 00)
Semitrailer grounded (refer to WP 0007 00)
Semitrailer fuel tank drained (refer to WP 0007 00)
Two hose tubes loosened at engine cabinet (refer
to WP 0094 00)
Air cleaner and hose removed (refer
to WP 0111 00)
Pump tubing removed from top of pump (refer to
WP 0148 00)
Muffler plate and muffler removed (refer
to WP 0115 00)
REMOVAL
1.
Remove 8 self-locking nuts (2), 16 washers (3), and 8 bolts (4) from top right and left edges of heat
shield (1). Discard self-locking nuts.
Back to Top
