TM 9-2330-330-14&P
0162 00-5
4-INCH PUMP MAINTENANCE—Continued
0162 00
8.
Remove seal (27) from bearing cap (28). Discard seal.
9.
Remove snap ring (31) and two bearings (32) from impeller shaft (33).
NOTE
Remove wear plate only if excessive wear is evident
and replacement is necessary.
10.
Remove two nuts (14), lockwashers (15), and wear plate (20) from volute (18). Discard
lockwashers.
11.
Remove eight studs (19) from volute (18).
12.
Remove three plugs (16, 17, and 26).