TM-9-2330-330-14-P

SEMITRAILER, FUEL TANKER: 5000-GALLON, FUEL-DISPENSING, AUTOMOTIVE, M969A3

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

NOVEMBER 2005

TM-9-2330-330-14-P - Page 735 of 1116

TM 9-2330-330-14&P

0163 00-1

PIPING FRAME ASSEMBLY REPLACEMENT

0163 00

THIS WP COVERS:

Removal, Installation, Follow-On Tasks

INITIAL SETUP:

Maintenance Level

Equipment Conditions

Direct and General Support

Semitrailer disconnected from prime mover (refer

to WP 0007 00)

Materials/Parts

Semitrailer grounded (refer to WP 0007 00)

Self-locking nuts (26) (item 86, WP 0175 00)

Self-locking nuts (11) (item 87, WP 0175 00)

Manifold valve removed (refer to WP 0135 00)

Discharge manifold valve removed (refer to

WP 0133 00)

Personnel Required

Two

G valve removed (refer to WP 0128 00)

Bottom loading valve removed (refer to

WP 0134 00)

Tools and Special Tools

Tool kit, general mechanic’s (item 4, WP 0171 00)

Emergency valve A control handle removed (refer

to WP 0139 00)

Main wiring harness removed (refer to

WP 0057 00)

F, E, and B valve and handwheels (refer to

WP 0132 00)

Static reels and electrical clips (refer to

WP 0087 00)

REMOVAL

1.

Remove 8 self-locking nuts (1), 16 washers (2), 8 bolts (3), and rear of piping frame (4) from

bulkhead (5). Discard self-locking nuts.

WARNING

Piping frame is heavy. Position a forklift or other lifting device

underneath framework. Do not attempt to lift it by yourself or

damage to equipment or injury to personnel could result.