TM-9-2330-331-14-P
SEMITRAILER, FLATBED: BREAKBULK/CONTAINER TRANSPORTER, 34 TON, M872A4
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL WITH REPAIR PARTS AND SPECIAL TOOLS LISTS
DECEMBER 2005
TM-9-2330-331-14-P - Page 275 of 472
TM 9-2330-331-14&P
0065 00
CONTAINER GUIDE ASSEMBLY REPLACEMENT
INITIAL SETUP:
Equipment Conditions
•
Ground Boards Emplaced
•
Landing Legs Down
•
Tires Chocked
•
Semitrailer Disconnected from Prime Mover
Tools/Test Equipment
•
General Mechanic’s Tool Kit (WP 0077 00-9)
Materials/Parts
•
Locknut (WP 0080 00-23)
•
Pushnut (WP 0080 00-23)
•
Lock Washer (WP 0080 00-23)
•
Locknut (WP 0080 00-23)
NOTE
There are two container guide assemblies that are replaced using the same
procedures. Procedures are for one container guide assembly.
CONTAINER GUIDE REMOVAL
1. Remove locknut (9), washers (8), and screw (7) from pin (2). Discard locknut.
2. Remove pin (2) from container guide (1).
3. Remove container guide (1).
Figure 1. Container Guide
Back to Top
