TM-9-2330-331-14-P

SEMITRAILER, FLATBED: BREAKBULK/CONTAINER TRANSPORTER, 34 TON, M872A4

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL WITH REPAIR PARTS AND SPECIAL TOOLS LISTS

DECEMBER 2005

  TM-9-2330-331-14-P - Page 267 of 472

TM 9-2330-331-14&P
0061 00
FLOOR DECK BOARDS REPLACEMENT
INITIAL SETUP:
Equipment Conditions
Ground Boards Emplaced
Landing Legs Down
Tires Chocked
Semitrailer Disconnected from Prime Mover
Tools/Test Equipment
General Mechanic’s Tool Kit (WP 0077 00-9)
Common No. 1 Tool Kit (WP 0077 00-9)
Materials/Parts
Screws (WP 0080 00-19)
NOTE
Measure board width and length to ensure proper replacement board.
Deck screws must be ordered separately, they are not part of a kit.
Procedures are for single board replacement. Follow the same
procedures for every board replaced.
REMOVAL
Remove screws (1) from floor board (2) being replaced and remove floor board (2)
from semitrailer.
Discard screws.
1
2
2
2
Figure 1. Floor Deck Boards
0061 00-1


Back to Top