TM-9-2330-331-14-P

SEMITRAILER, FLATBED: BREAKBULK/CONTAINER TRANSPORTER, 34 TON, M872A4

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL WITH REPAIR PARTS AND SPECIAL TOOLS LISTS

DECEMBER 2005

TM-9-2330-331-14-P - Page 298 of 472

TM 9-2330-331-14&P

0071 00

FRONT AND REAR AXLE REPLACEMENT-continued

FRONT AND REAR AXLE REMOVAL-continued

1. Raise semitrailer and position jackstand under center axle not being removed.

2. Disconnect ABS sensor cables as necessary.

3. Remove eight flange nuts (nut, plain, extended washer) (7), washers (2), screws (1), two axle

end caps (9), and rubber strips (8) from axle (3) and equalizing beam (6). Discard flange nuts

and rubber strips.

4. Remove axle (2), two axle adapters (3), and rubber pads (5) from equalizing beam (6).