TM 9-2330-334-13&P
ANTI-LOCK BRAKE SYSTEM (ABS) DIAGNOSTIC
LIGHT BLINKS SEVEN TIMES-Continued
0036 00
BRAKE SYSTEM TROUBLESHOOTING - Continued
Table 1.
Anti-Lock Brake System (ABS) Diagnostic Light Blinks Seven Times.
Change 1
0036 00-2
INDICATION/CONDITION
DECISION (NO/YES)
PROCEDURAL STEPS
1.
Is 4-8 ohms of resistance
present across ABS relay
valve harness pin 5 to pin 6?
No.
Replace ABS relay valve
(WP 0075 00).
1.
Set multimeter to ohms.
Yes.
Go to (Indication/Condition
2).
2.
Disconnect ABS relay valve
harness from ABS ECU
valve.
3.
Connect positive (+) probe
of multimeter to ABS relay
valve harness pin 5.
4.
Connect negative (-) probe
of multimeter to ABS relay
valve harness pin 6 and note
reading on multimeter.