TM 9-2330-334-13&P
ANTI-LOCK BRAKE SYSTEM (ABS) DIAGNOSTIC
LIGHT BLINKS FIVE TIMES-Continued
0034 00
BRAKE SYSTEM TROUBLESHOOTING - Continued
Table 1.
Anti-Lock Brake System (ABS) Diagnostic Light Blinks Five Times - Continued.
Change 1
0034 00-4
INDICATION/CONDITION
DECISION (NO/YES)
PROCEDURAL STEPS
3.
Is continuity present across
right front ABS control
sensor harness connector
with jumper wire across
connector BU2?
No.
Replace ABS control sensor
harness (WP 0073 00).
1.
Loosen retaining clip on
connector BU2.
Yes.
Replace ABS ECU (WP 0071
00).
2.
Disconnect connector BU2
from ABS ECU.
3.
Install jumper wire across
connector BU2.
4.
Connect positive (+) probe
of multimeter to one pin of
ABS control sensor harness
connector.
5.
Connect negative (-) probe
of multimeter to other pin of
ABS control sensor harness
connector and note reading
on multimeter.
END OF WORK PACKAGE