TM 9-2330-334-13&P
ANTI-LOCK BRAKE SYSTEM (ABS) DIAGNOSTIC
LIGHT BLINKS THREE TIMES-Continued
0032 00
BRAKE SYSTEM TROUBLESHOOTING - Continued
Table 1.
Anti-Lock Brake System (ABS) Diagnostic Light Blinks Three Times - Continued.
Change 1
0032 00-4
INDICATION/CONDITION
DECISION (NO/YES)
PROCEDURAL STEPS
3.
Is continuity present across
right rear ABS control sensor
harness connector with
jumper wire across
connector BU1?
No.
Replace ABS control sensor
harness (WP 0073 00).
1.
Loosen retaining clip on
connector BU1.
Yes.
Replace ABS ECU (WP 0071
00).
2.
Disconnect connector BU1
from ABS ECU.
3.
Install jumper wire across
connector BU1.
4.
Connect positive (+) probe
of multimeter to one pin of
ABS control sensor harness
connector.
5.
Connect negative (-) probe
of multimeter to other pin of
ABS control sensor harness
connector and note reading
on multimeter.
END OF WORK PACKAGE