TM 9-2330-334-13&P
ANTI-LOCK BRAKE SYSTEM (ABS) DIAGNOSTIC
LIGHT DOES NOT OPERATE-Continued
0031 00
BRAKE SYSTEM TROUBLESHOOTING - Continued
Table 1.
Anti-Lock Brake System (ABS) Diagnostic Light Does Not Operate - Continued.
Change 1
0031 00-14
INDICATION/CONDITION
DECISION (NO/YES)
PROCEDURAL STEPS
12.
Is 18-30 VDC present at 24
VDC intervehicular cable pin
K?
No.
Replace 24 VDC
intervehicular cable (WP
0062 00).
1.
Position towing vehicle
master power switch to off.
Yes.
Go to (Indication/Condition
13).
2.
Disconnect 24 VDC
intervehicular cable from
voltage converter box.
3.
Connect positive (+) probe
of multimeter to 24 VDC
intervehicular cable pin K.
4.
Connect negative (-) probe
of multimeter to a known
good ground.
5.
Position master power switch
to on and note reading on
multimeter.