TM 9-2330-334-13&P
ANTI-LOCK BRAKE SYSTEM (ABS) DIAGNOSTIC
LIGHT DOES NOT OPERATE-Continued
0031 00
BRAKE SYSTEM TROUBLESHOOTING - Continued
Table 1.
Anti-Lock Brake System (ABS) Diagnostic Light Does Not Operate - Continued.
0031 00-13
Change 1
INDICATION/CONDITION
DECISION (NO/YES)
PROCEDURAL STEPS
11.
Is 8-16 VDC present at
terminal lug TL251A?
No.
Go to (Indication/Condition
12).
1.
Set multimeter to VDC.
Yes.
Replace ABS ECU (WP 0071
00).
2.
Connect positive (+) probe
of multimeter to terminal lug
TL 251A (located on terminal
5 in junction box).
3.
Connect negative (-) probe
of multimeter to a known
good ground.
4.
Position master power switch
to on and note reading on
multimeter.