TM 9-2330-334-13&P
ANTI-LOCK BRAKE SYSTEM (ABS) DIAGNOSTIC
LIGHT DOES NOT OPERATE-Continued
0031 00
BRAKE SYSTEM TROUBLESHOOTING - Continued
Table 1.
Anti-Lock Brake System (ABS) Diagnostic Light Does Not Operate - Continued.
Change 1
0031 00-4
INDICATION/CONDITION
DECISION (NO/YES)
PROCEDURAL STEPS
3.
Is 8-16 VDC present at green
and white ABS diagnostic
light lead terminal lug?
No.
Go to (Indication/Condition
5).
1.
Set multimeter to VDC.
Yes.
Replace ABS diagnostic
light harness (WP 0077
00).
2.
Remove junction box cover
for access (WP 0059 00).
3.
Disconnect green and white
ABS diagnostic light lead
terminal lug from terminal
lug TL611.
4.
Connect positive (+) probe
of multimeter to green and
white ABS diagnostic light
terminal lug.
5.
Connect negative (-) probe
of multimeter to a known
good ground.
6.
Position towing vehicle
master power switch to on
and note reading on
multimeter.