TM 9-2330-334-13&P
ALL LIGHTS DO NOT ILLUMINATE-Continued
0030 00
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued
Table 1.
All Lights Do Not Illuminate.
Change 1
0030 00-2
INDICATION/CONDITION
DECISION (NO/YES)
PROCEDURAL STEPS
1.
Is 18-30 VDC present at
intervehicular cable pin E?
No.
Replace intervehicular cable
(WP 0062 00).
1.
Set multimeter to VDC.
Yes.
Replace voltage converter
box (WP 0058 00).
2.
Disconnect intervehicular
cable connector from
voltage converter box.
3.
Connect positive (+) probe
of multimeter to
intervehicular cable pin E.
4.
Connect negative (-) probe
of multimeter to a known
good ground.
5.
Position main light switch to
SER DRIVE on towing
vehicle and note reading on
multimeter.
END OF WORK PACKAGE