TM 9-2330-334-13&P
BOTH BLACKOUT STOPLIGHTS DO NOT ILLUMINATE-Continued
0029 00
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued
Table 1.
Both Blackout Stoplights Do Not Illuminate - Continued.
0029 00-3
Change 1
INDICATION/CONDITION
DECISION (NO/YES)
PROCEDURAL STEPS
2.
Is continuity present across
circuit breaker CB2?
No.
Replace circuit breaker CB2
(WP 0057 00).
1.
Set multimeter to ohms.
Yes.
Go to (Indication/Condition
3).
2.
Remove two screws and
open voltage converter box.
3.
Connect positive (+) probe
of multimeter to one
terminal on circuit breaker
CB2.
4.
Connect negative (-) probe
of multimeter to other
terminal on circuit breaker
CB2 and note reading on
multimeter.