TM 9-2330-334-13&P
LEFT BLACKOUT TAILLIGHT DOES NOT ILLUMINATE-Continued
0027 00
THIS WORK PACKAGE COVERS:
Electrical System Troubleshooting
Table 1. Left Blackout Taillight Does Not Illuminate.
Change 1
0027 00-2
INDICATION/CONDITION
DECISION (NO/YES)
PROCEDURAL STEPS
1.
Is 18-30 VDC present at
connector J258?
No.
Repair wire 117 (EM 0195)
or replace left rear electrical
harness (WP 0064 00).
1.
Set multimeter to VDC.
Yes.
Replace left rear composite
taillight (WP 0060 00).
2.
Remove left rear composite
light from trailer for access
(WP 0060 00).
3.
Disconnect connector J258
from left rear composite
taillight.
4.
Connect positive (+) probe
of multimeter to connector
J258.
5.
Connect negative (-) probe
of multimeter to a known
good ground.
6.
Position main light switch to
B.O. MARKER on towing
vehicle and note reading on
multimeter.
END OF WORK PACKAGE