TM 9-2330-334-13&P
RIGHT BLACKOUT STOPLIGHT DOES NOT ILLUMINATE-Continued
0026 00
THIS WORK PACKAGE COVERS:
Electrical System Troubleshooting
Table 1. Right Blackout Stoplight Does Not Illuminate.
Change 1
0026 00-2
INDICATION/CONDITION
DECISION (NO/YES)
PROCEDURAL STEPS
1.
Is 18-30 VDC present at
connector J252?
No.
Repair wire 111 (EM 0195)
or replace right rear
electrical harness (WP 0063
00).
1.
Set multimeter to VDC.
Yes.
Replace right rear
composite taillight (WP
0060 00).
2.
Remove right rear composite
light from trailer for access
(WP 0060 00).
3.
Disconnect connector J252
from right rear composite
taillight.
4.
Connect positive (+) probe
of multimeter to connector
J252.
5.
Connect negative (-) probe
of multimeter to a known
good ground.
6.
Position main light switch to
B.O. DRIVE on towing
vehicle, depress brake pedal,
and note reading on
multimeter.
END OF WORK PACKAGE