TM 9-2330-334-13&P
LEFT BLACKOUT STOPLIGHT DOES NOT ILLUMINATE-Continued
0028 00
THIS WORK PACKAGE COVERS:
Electrical System Troubleshooting
Table 1. Left Blackout Stoplight Does Not Illuminate.
Change 1
0028 00-2
INDICATION/CONDITION
DECISION (NO/YES)
PROCEDURAL STEPS
1.
Is 18-30 VDC present at
connector J257?
No.
Repair wire 116 (EM 0195)
or replace left rear electrical
harness (WP 0064 00).
1.
Set multimeter to VDC.
Yes.
Replace left rear composite
taillight (WP 0060 00).
2.
Remove left rear composite
light from trailer for access
(WP 0060 00).
3.
Disconnect connector J257
from left rear composite
taillight.
4.
Connect positive (+) probe
of multimeter to connector
J257.
5.
Connect negative (-) probe
of multimeter to a known
good ground.
6.
Position main light switch to
B.O. DRIVE on towing
vehicle, depress brake pedal,
and note reading on
multimeter.
END OF WORK PACKAGE