TM 9-2330-334-13&P
ALL LIGHTS DO NOT ILLUMINATE
0030 00
THIS WORK PACKAGE COVERS:
Electrical System Troubleshooting
0030 00-1
Change 1
INITIAL SETUP:
Maintenance Level
Field
Tools/Special Tools
Tool Kit, Genl Mech (Item 24, WP 0167 00)
Materials/Parts
Ties, Cable, Plastic (Item 19, WP 0165 00)
Wire, Elect, 50 ft (Item 21, WP 0165 00)
Personnel Required
Two
Equipment Conditions
Trailer coupled (TM 9-2320-392-10-1)
Towing vehicle main light switch set to off
(TM 9-2320-392-10-1)
PROCEDURE
WARNING
Remove rings, bracelets, watches, necklaces, and any other jewelry before working
around vehicle. Jewelry can catch on equipment and cause injury or short across
electrical circuit and cause severe burns or electrical shock.
Failure to comply may
result in injury to personnel.
CAUTION
Use care when testing electrical connectors.
Do not damage connector pins or sockets with
multimeter probes.
Failure to comply may result in damage to equipment.
NOTE
•
Return vehicle to mission capable condition and perform (Operational Checkout and
Troubleshooting Procedures WP 0013 00) after a corrective action has been
performed.
•
Refer to Electrical Schematic at the end of this chapter as required.
•
Remove plastic cable ties as required.