TM 9-2330-334-13&P
LEFT STOPLIGHT DOES NOT ILLUMINATE-Continued
0024 00
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued
Table 1.
Left Stoplight Does Not Illuminate - Continued.
Change 1
0024 00-6
INDICATION/CONDITION
DECISION (NO/YES)
PROCEDURAL STEPS
5.
Is 8-16 VDC present at
connector J261?
No.
Repair wire 119 (EM 0195)
or replace left rear electrical
harness (WP 0064 00).
1.
Set multimeter to VDC.
Yes.
Go to (Indication/Condition
6).
2.
Remove left rear composite
light from trailer for access
(WP 0060 00).
3.
Disconnect connector J261
from left rear composite
taillight.
4.
Connect positive (+) probe
of multimeter to connector
J261.
5.
Connect negative (-) probe
of multimeter to a known
good ground.
6.
Position main light switch to
STOP LIGHT on towing
vehicle, depress brake pedal,
and note reading on
multimeter.