TM 9-2330-334-13&P
LEFT STOPLIGHT DOES NOT ILLUMINATE-Continued
0024 00
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued
Table 1.
Left Stoplight Does Not Illuminate - Continued.
0024 00-5
Change 1
INDICATION/CONDITION
DECISION (NO/YES)
PROCEDURAL STEPS
4.
Is 8-14 VDC present at
terminal lug TL253A?
No.
Repair wire 109 (EM 0195)
or replace main electrical
harness (WP 0066 00).
1.
Set multimeter to VDC.
Yes.
Go to (Indication/Condition
5).
2.
Remove cover of junction
box (WP 0059 00).
3.
Connect positive (+) probe
of multimeter to terminal lug
TL253A.
4.
Connect negative (-) probe
of multimeter to a known
good ground.
5.
Position main light switch on
towing vehicle to STOP
LIGHT.
6.
Depress brake pedal and
note reading on multimeter.
6.
Position main light switch to
ALL OFF.