TM 9-2330-334-13&P
RIGHT STOPLIGHT DOES NOT ILLUMINATE-Continued
0022 00
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued
Table 1.
Right Stoplight Does Not Illuminate - Continued.
0022 00-5
Change 1
INDICATION/CONDITION
DECISION (NO/YES)
PROCEDURAL STEPS
4.
Is 8-14 VDC present at
terminal lug TL252A?
No.
Repair wire 110 (EM 0195)
or replace main electrical
harness (WP 0066 00).
1.
Set multimeter to VDC.
Yes.
Go to (Indication/Condition
5).
2.
Remove two screws and
cover from junction box.
3.
Connect positive (+) probe
of multimeter to terminal lug
TL252A.
4.
Connect negative (-) probe
of multimeter to a known
good ground.
5.
Position main light switch on
towing vehicle to STOP
LIGHT.
6.
Depress brake pedal and
note reading on multimeter.
7.
Position main light switch to
ALL OFF.