TM 9-2330-334-13&P
RIGHT STOPLIGHT DOES NOT ILLUMINATE-Continued
0022 00
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued
Table 1.
Right Stoplight Does Not Illuminate - Continued.
0022 00-3
Change 1
INDICATION/CONDITION
DECISION (NO/YES)
PROCEDURAL STEPS
2.
Is continuity present across
circuit breaker CB4?
No.
Replace circuit breaker CB4
(WP 0057 00).
1.
Set multimeter to ohms.
Yes.
Go to (Indication/Condition
3).
2.
Loosen two screws and open
voltage converter box.
3.
Connect positive (+) probe
of multimeter to one
terminal on circuit breaker
CB4.
4.
Connect negative (-) probe
of multimeter to other
terminal on circuit breaker
CB4 and note reading on
multimeter.