TM 9-2330-334-13&P
RIGHT TAILLIGHT DOES NOT ILLUMINATE-Continued
0021 00
THIS WORK PACKAGE COVERS:
Electrical System Troubleshooting
Table 1.
Right Taillight Does Not Illuminate.
Change 1
0021 00-2
INDICATION/CONDITION
DECISION (NO/YES)
PROCEDURAL STEPS
1.
Is 8-16 VDC present at
connector J254?
No.
Repair wire 113B (EM
0195) or replace right rear
electrical harness (WP 0063
00).
1.
Set multimeter to VDC.
Yes.
Replace right rear
composite taillight (WP
0060 00).
2.
Remove right rear composite
light from trailer for access
(WP 0060 00).
3.
Disconnect connector J254
from right rear composite
taillight.
4.
Connect positive (+) probe
of multimeter to connector
J254.
5.
Connect negative (-) probe
of multimeter to a known
good ground.
6.
Position main light switch to
SER DRIVE on towing
vehicle and note reading on
multimeter.
END OF WORK PACKAGE