TM 9-2330-334-13&P
RIGHT STOPLIGHT DOES NOT ILLUMINATE-Continued
0022 00
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued
Table 1.
Right Stoplight Does Not Illuminate - Continued.
Change 1
0022 00-4
INDICATION/CONDITION
DECISION (NO/YES)
PROCEDURAL STEPS
3.
Is 8-16 VDC present at
TL252?
No.
Replace module 2 (WP
0057 00).
1.
Set multimeter to VDC.
Yes.
Go to (Indication/Condition
4).
2.
Connect intervehicular cable
connector to voltage
converter box.
3.
Position main light switch to
STOP LIGHT on towing
vehicle and depress brake
pedal.
4.
Connect positive (+) probe
of multimeter to TL252.
5.
Connect negative (-) probe
of multimeter to a known
good ground and note
reading on multimeter.
6.
Position main light switch to
ALL OFF.