TM 9-2330-334-13&P
ANTI-LOCK BRAKE SYSTEM (ABS) DIAGNOSTIC
LIGHT DOES NOT OPERATE-Continued
0031 00
BRAKE SYSTEM TROUBLESHOOTING - Continued
Table 1.
Anti-Lock Brake System (ABS) Diagnostic Light Does Not Operate - Continued.
0031 00-9
Change 1
INDICATION/CONDITION
DECISION (NO/YES)
PROCEDURAL STEPS
7.
Is continuity present from
ABS diagnostic tool
connector pin C to ABS ECU
Power/Diagnostic Cable Pin
6?
No.
Replace ABS ECU
Power/Diagnostic Cable
(WP 0074 00).
1.
Connect positive (+) probe
of multimeter to ABS
Diagnostic Tool connector
pin C.
Yes.
Go to (Indication/Condition
8).
2.
Connect negative (-) probe
of multimeter to ABS ECU
Power/Diagnostic cable pin 6
and note reading on
multimeter.