TM 9-2330-334-13&P
SUSPENSION SYSTEM SITS UNEVEN
0045 00
THIS WORK PACKAGE COVERS:
Pneumatic System troubleshooting.
0045 00-1
Change 1
INITIAL SETUP:
Maintenance Level
Field
Tools/Special Tools
Gage, Pressure, 0-150 psi. (Item 5, WP 0167
00)
Tool Kit, Genl Mech (Item 24, WP 0167 00)
Goggles, Industrial (Item 8, WP 0167 00)
Materials/Parts
Ties, Cable, Plastic (Item 19, WP 0165 00)
Soap, Laundry (Item 15, WP 0165 00)
Bushing, Pipe (Item 4, WP 0165 00)
Personnel Required
Two
Equipment Conditions
Trailer air system charged
(TM 9-2320-392-10-1)
PROCEDURE
WARNING
Wear appropriate eye protection when working under vehicle due to the possibility
of falling debris. Failure to comply may result in injury to personnel.
NOTE
•
Return vehicle to mission capable condition and perform (Operational Checkout and
Troubleshooting Procedures WP 0013 00) after a corrective action has been
performed.
•
Tag hoses and connection points prior to disconnecting.
•
Remove plastic cable ties as required.
Select the appropriate fault to determine where troubleshooting continues:
•
One air spring does not inflate (Table 1, Indication/Condition 1).
•
Rear air springs do not inflate (Table 1, Indication/Condition 2).
•
Front Suspension Does Not Raise/Lower (WP 0047 00).