TM 9-2330-334-13&P
DRAWBAR DOES NOT RAISE/LOWER
0050 00
THIS WORK PACKAGE COVERS:
Pneumatic Troubleshooting
0050 00-1
Change 1
INITIAL SETUP:
Maintenance Level
Field
Tools/Special Tools
Tool Kit, Genl Mech (Item 24, WP 0167 00)
Materials/Parts
Ties, Cable, Plastic (Item 19, WP 0165 00)
Soap, Laundry (Item 15, WP 0165 00)
Personnel Required
Two
Equipment Conditions
Air tanks charged (TM 9-2320-392-10)
References
TM 9-2320-392-10
PROCEDURE
WARNING
•
Remove rings, bracelets, watches, necklaces, and any other jewelry before
working around vehicle. Jewelry can catch on equipment and cause injury
or short across electrical circuit and cause severe burns or electrical shock.
Failure to comply may result in injury to personnel.
•
Wear appropriate eye protection when working under trailer due to
possibility of falling debris.
Failure to comply may result in injury to
personnel.
NOTE
•
Return vehicle to mission capable condition and perform (Operational Checkout Work
Package WP 0013 00) after a corrective action has been performed.
•
Tag hoses and connection points prior to disconnecting.
•
Remove plastic cable ties as required.