TM-9-2330-334-13-P

FAMILY OF MEDIUM TACTICAL VEHICLES (FMTV) LOAD HANDLING SYSTEM TRAILER (LHST) M1147A1

TECHNICAL MANUAL; OPERATOR AND FIELD LEVEL MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

DECEMBER 2013

CHANGE 1

TM-9-2330-334-13-P - Page 448 of 1184

TM 9-2330-334-13&P

JUNCTION BOX REPLACEMENT - Continued

0059 00

Change 1

0059 00-6

INSTALLATION - Continued

NOTE

All junction box terminal lugs are installed the same way. Terminal lug 1 is shown. Refer to

Table 2. Junction Box Terminal Stud and Wiring Harness Terminal Lug Locations

for details.

4.

Install ABS ground terminal lug (10) and terminal lugs TL282 (9), TL275 (8), TL264 (7), and TL261A

(6) on junction box terminal stud 1 (11) with lockwasher (5) and nut (4).

5.

Perform the previous step on remaining junction box terminal studs.

Table 2.

Junction Box Terminal Stud and Wiring Harness Terminal Lug Locations.

Junction Box Terminal Stud Position

Electrical Harness Terminal Lugs

Stud Position 1

TL261A, TL264, TL275, TL282, ABS Ground Terminal Lug

Stud Position 2

TL255A, TL267, TL273, TL281

Stud Position 3

TL257A, TL265, TL271

Stud Position 4

TL256A, TL266, TL272

Stud Position 5

TL251A, ABS Constant Power, ABS Stop Light Power

Stud Position 6

TL253A, TL274

Stud Position 7

TL252A, TL268